12
ADJUSTMENTS
Adjusting the Tension Control Knob
To increase the load, turn the tension control knob in a
clockwise direction.
To decrease the load, turn the tension control knob
in a
counterclockwise direction.
Adjusting the Rear Stabilizer End Cap
Turn the rear stabilizer end cap on the rear stabilizer
as needed to level the upright bike.
Adjusting the Seat Height
Turn the seat post knob in a counterclockwise direction
until the seat post can be slid up or down and then
slide the seat post up or down direction to the suitable
position. Lock the seat post in place by tightening the
seat post knob in a clockwise direction.
NOTE: When adjusting the height of seat post,
make sure the seat post bushing does not exceed
the mark line on the seat post.
Tension Control Knob
Rear Stabilizer End Cap
Seat Post Knob
