9
4. Handlebar and Computer Installation
Remove two M8x15 Bolts (24) and two Ø16xØ8x1.5 Curve Washers (64) from the
Handlebar Post (3). Remove bolts with the S6 Allen Wrench provided.
Insert the Hand Pulse Sensor Wires (53) into the hole on the Handlebar Post (3) and then
pull them out from the top end of the Handlebar Post (3).
Attach the Handlebar (2) onto the Handlebar Post (3) with two M8x15 Bolts (24) and two
Ø16xØ8x1.5 Curve Washers (64) that were removed. Tighten bolts with the S6 Allen
Wrench provided.
Remove two M5x10 Bolts (47) from the Computer (10). Remove bolts with the Multi Hex
Tool with Phillips Screwdriver provided.
Connect the Hand Pulse Sensor Wires (53) and Extension Sensor Wire (59) to the wires that
come from the Computer (10). Tuck wires into the Handlebar Post (3).
Attach the Computer (10) onto the top end of the Handlebar Post (3) with two M5x10 Bolts
(47) that were removed. Tighten bolts with the Multi Hex Tool with Phillips Screwdriver
provided.
3
10
47
64
24
53
53
59
2
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
Allen Wrench S6
