background image

 

6

ASSEMBLY INSTRUCTIONS 

1. Front/Rear Stabilizers and Right/Left Foot Pedals Installation 

Remove four M8x15 Bolts (24), four Ø20xØ8x

δ

1.5 Big Curve Washers (37), and four Ø8 

Spring Washers (65) from the Rear Stabilizer (4).    Remove bolts with the S6 Allen Wrench 
provided. 
Attach the Rear Stabilizer (4) into the Main Frame (1) with four M8x15 Bolts (24), four 
Ø20xØ8x

δ

1.5 Big Curve Washers (37), and four Ø8 Spring Washers (65) that were 

removed.    Tighten bolts with the S6 Allen Wrench provided. 
Position the Front Stabilizer (6) in front of the Main Frame (1) and align bolt holes. 
Attach the Front Stabilizer (6) onto the front curve of the Main Frame (1) with two M10 Cap 
Nuts (34), two M10x57 Bolts (35), and two Ø10 Big Curve Washers (36).  Tighten nuts with 
the Multi Hex Tool provided. 

Foot Pedals Installation 
The Cranks, Pedal Shafts and Pedal Straps are marked “R” for Right and “L” for Left. 

Insert the pedal shaft of Left Foot Pedal (20) into threaded hole in the left Crank (19).   
Turn the pedal shaft by hand in the counter-clockwise direction until snug.   

Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the 
threads. 

Tighten the pedal shaft of Left Foot Pedal (20) with the Multi Hex Tool provided. 
Insert pedal shaft of Right Foot Pedal (21) into threaded hole in right Crank (19). 
Turn the pedal shaft by hand in the clockwise direction until snug. 
Tighten pedal shaft of Right Foot Pedal (21) with the Multi Hex Tool provided.

 

 
Hardware: 

 

 
 
 
 

2 Cap Nuts (M10) 

2 Bolts (M10x57) 

2 Big Curve Washers (Ø10)

65

37

37

65

24

24

4

21

20

21

19

36 34

6

35

1

Multi Hex Tool 

  S10, S13, S17, S19

Allen Wrench S6 

Tool: 

Содержание 20265


















Отзывы: