Life Fitness LS 9100, Руководство по обслуживанию

Страница: 26 / 93

Life Fitness 9100/9500HR Belt Drive Stairclimbers
3
DIAGNOSTIC MODE
(Large Display)
ACCESS AND EXECUTION
Test Mode
The test mode allows you to check the circuitry of all numeric and program keys.
1. Turn the unit power on. The console will display the message Press Start To Begin.
2. Press the designated program and action keys in the sequence listed in order to enter into the test mode. A short beep
will occur after each key is pressed. The code is recognized any time “Press Start To Begin” message is displayed in
display center and will enable a full set of test mode functions.
Zero ‘0’ Key Numeric key
MANUAL Program key
PACE Action key
MANUAL Program key
CLIMBING Action key
NOTE: All console LED’s and VF display segments will turn ON to signal the access code.
3. Press each key to test the circuitry. A different pattern will be displayed on the LED matrix (Program Profile Screen) 7-
segment LED displays and the VF display.
NOTE: The Watts, Total Cal, Hill, Random, Manual, Fat Burn, and Cardio. Heart Rate enunciate or LED’s will remain lit and
unaffected by this test.
Checking Keypad Circuitry
Numeric Key LED Matrix(Program Profile
Display)
7-Segment LED’s
(Program Displays
VF Display
0 1 row 0 All 0’s
1 2 rows 1 All 1’s
2 3 rows 2 All 2’s
3 4 rows 3 All 3’s
4 5 rows 4 All 4’s
5 6 rows 5 All 5’s
6 7 rows 6 All 6’s
7 8 rows 7 All 7’s
8 9 rows 8 All 8’s
9 10 rows 9 All 9’s
CLEAR Yellow column
Red column 2,4,6,8,10 N/A Clear Key
HILL Yellow column
Red column 2,4,6,8,10 N/A Hill Program
RANDOM Red column 1,3,5,7,9,11 N/A Random program
MANUAL Yellow column
Red column 2,4,6,8,10 N/A Manual Program
FIT TEST Red column 1,3,5,7,9,11 N/A Fit Test Program
CARDIO Yellow column
Red column 2,4,6,8,10 N/A Cardio Program
FAT BURN
Red column 2,4,6,8,10
N/A Fat Burning Program
PACE Yellow column
Red column 2,4,6,8,10 N/A Pace Step Action
CLIMBING Red column 1,3,5,7,9,11 N/A Climbing Action