Attach Motor Cover
1.
Snap the Tinnerman clips on the motor cover into place.
Item
Description
Qty
1
Motor Cover
1
2.
Securely tighten the two top screws of the front shroud.
Item
Description
Qty
1
Screw
2
1.5 Nm (1.1 ft. lbs.)
Install the Power Cord
Follow these steps if the power cord is not installed:
1.
Insert the power cord into the receptacle.
Item
Description
Qty
1
Power cord
1
2
Cable support bracket
1
3
M4 X 10 Phillips Pan Head Screws
2
2.
Attach the cable support bracket to the frame using the two screws.
Page 39 of 40