background image

1. Getting Started

Safety Instructions

Read all instructions before use.

CAUTION: Any changes or modifications to this equipment could void the product warranty.

CAUTION: Risk of injury to persons – to avoid injury, use extreme caution when stepping onto or off of a
moving belt. Read assembly instruction manual before using.
WARNING: Health-related injuries may result from incorrect or excessive use of exercise equipment. Life
Fitness STRONGLY recommends seeing a physician for a complete medical exam before undertaking an
exercise program, particularly if the user has a family history of high blood pressure or heart disease, is over the
age of 45, smokes, has high cholesterol, is obese, or has not exercised regularly in the past year. If, at any time
while exercising, the user experiences faintness, dizziness, pain, or shortness of breath, he or she must stop
immediately.
WARNING: To reduce the risk of burns, fire, electric shock, or injury, it is imperative to connect each product to
a properly grounded electrical outlet.
WARNING: Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury or
death. If you feel faint, stop exercising immediately.
WARNING: Keep the area 6.5 ft. (2 m) by 3 ft. (0.9 m) behind the treadmill clear of any obstructions, including
walls, furniture, and other equipment. Contact Customer Support Services for an optional longer power cord if
necessary.
WARNING: Be sure the emergency stop lanyard is clipped to the user and in proper position on the treadmill
before beginning any workout.
WARNING: The belt centering adjustment must be performed if the belt is not between the marks indicating
the maximum allowed lateral positions. Refer to Treadmill Assembly Instructions.
WARNING: This product can expose you to chemicals including Acrylonitrile, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to 

http://

www.P65Warnings.ca.gov

DANGER: To reduce the risk of electrical shock or injury from moving parts, always unplug product before
cleaning or attempting any maintenance activity.

• Never operate the product if it has a damaged power cord or electrical plug, or if it has been dropped, damaged,

or even partially immersed in water. Contact Customer Support Services.

• Position the product so that the power cord plug to the wall is accessible to the user. Make sure that the power cord

is not knotted or twisted and that it is not trapped under any equipment or other objects.

• If the electrical supply cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or a

similarly qualified person to avoid a hazard.

• Always follow the console instructions for proper operation.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental

capabilities, or lack of experience or knowledge unless they have supervision or been given instruction concerning
the use of the appliance by a person responsible for their safety.

• Do not use this product outdoors, near swimming pools or in areas of high humidity.
• Never operate the product with the air openings blocked. Keep air openings free of lint, hair, or any other

obstructing material.

• Never insert objects into any opening in these products. If an object should drop inside, turn off the power, unplug

the power cord from the outlet, and carefully retrieve it. If the item cannot be reached, contact Customer Support
Services.

• Never place liquids of any type directly on the unit, except in an accessory tray or holder. Containers with lids are

recommended.

• Do not use these products in bare feet. Always wear shoes. Wear shoes with rubber or high-traction soles. Do not

use shoes with heels, leather soles, cleats or spikes. Make sure no stones are embedded in the soles.

• Keep all loose clothing, shoelaces, and towels away from moving parts.
• Do not reach into, or underneath, the unit or tip it on its side during operation.
• This equipment is not intended for use by children. Keep children under the age of 14 away from the machine.
• Do not allow other people to interfere in any way with the user or equipment during a workout.
• Allow LCD consoles to “normalize” with respect to temperature for one hour before plugging the unit in and using.

Page 4 of 40

Содержание INTEGRITY INTDX













































Отзывы: