background image

• Always follow the console instructions for proper operation.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental

capabilities, or lack of experience or knowledge unless they have supervision or been given instruction concerning
the use of the appliance by a person responsible for their safety.

• This equipment is not intended for use by children. Keep children under the age of 14 away from the machine.
• Do not use this product outdoors, near swimming pools or in areas of high humidity.
• Never operate the product with the air openings blocked. Keep air openings free of lint, hair, or any other

obstructing material.

• Never insert objects into any opening in these products. If an object should drop inside, turn off the power, unplug

the power cord from the outlet, and carefully retrieve it. If the item cannot be reached, contact Customer Support
Services.

• Never place liquids of any type directly on the unit, except in an accessory tray or holder. Containers with lids are

recommended.

• Do not use these products in bare feet. Always wear shoes. Wear shoes with rubber or high-traction soles. Do not

use shoes with heels, leather soles, cleats or spikes. Make sure no stones are embedded in the soles.

• Do not reach into, or underneath, the unit or tip it on its side during operation.
• Do not allow other people to interfere in any way with the user or equipment during a workout.
• Allow LCD consoles to “normalize” with respect to temperature for one hour before plugging the unit in and using.
• Use these products for their intended use as described in this manual. Do not use attachments that have not been

recommended by the manufacturer.

• Free standing equipment shall be installed on a stable and leveled surface.
• Read all warnings on each product prior to starting a workout.
• If warnings are missing or damaged, please contact Customer Support Services immediately for replacement

warning labels. Warning labels are shipped with every product and should be installed before product is used. Life
Fitness Family of Brands is not responsible for missing or damaged warning labels.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

.

Testing Parameters

Displayed power (Wattage) and speed (Strides Per Minute), were found to meet class A accuracy when compared with
measured power and speed, with adjustable braking positioned in its maximum position, at the following accuracy test
points:
• 25 W, 37 SPM
• 50 W, 52 SPM
• 100 W, 72 SPM

• 150 W, 86 SPM
• 175 W, 92 SPM
• 200 W, 97 SPM

Page 4 of 47

Содержание INA-CS



















































Отзывы: