Setting
Default
Description
Telemetry
Enabled
Switching on the telemetry feature makes it possible to use the Polar®-
compatible Heart Rate Zone Training exercises with a Polar telemetry heart
rate chest strap for monitoring the heart rate.
Speed Increase Limiting
with Up Key
Off
When enabled, the user cannot press and hold the speed button to increase
the speed.
Treadmill Only
Setting
Default
Description
Maximum Speed
14.0 MPH (23 KPH)
Set the fastest speed the treadmill can operate.
Minimum Speed
0.5 MPH (0.8 KPH )
Set the slowest speed the treadmill can operate.
Maximum % Incline
15.0
This option changes the maximum incline grade to a value lower than 15%.
Activity Zone Speed
Keys
Enabled
This option allows the user to assign belt speed to Walk / Jog / Run values.
Stride Sensor (95T only) On
This option automatically pauses the workout if the user steps off the belt.
Deceleration Rate
3
The rate at which the treadmill decelerates to the selected speed, ranging
from 1 (slowest) to 5 (fastest).
Acceleration Rate
3
The rate at which the treadmill accelerates to the selected speed, ranging
from 1 (slowest) to 5 (fastest).
Turn OFF Stride Sensor
Notification
Stride Sensor Button On
Pause Button Disabled
This option detects a user using a treadmill but will not go into Pause mode if
a user is not detected.
PowerMill Only
Setting
Default
Description
Warm Up Speed: Level
0 (12-19 SPM)
Off
This option, if enabled, controls whether or not Level 0 may be used in
program setup or during a workout. Level 0 corresponds to intensity levels
below Level 1.
High Speeds: Level
21-25 (160-182 SPM)
On
This option controls whether or not Levels 21 though 25 may be used in
program setup or during a workout (MANUAL and SPEED INTERVAL
workouts ONLY).
Calorie Per Hour (CPH)
Display
On (International: Off)
If this option is enabled, the MESSAGE CENTER displays the number of
calories burned per hour during the workout.
Steps Climbed Display
Off
If this setting is enabled, the total number of steps climbed is periodically
shown during a workout.
Max Acceleration Rate
3
This sets the rate at which the PowerMill Climber accelerates to the selected
speed, ranging from one (slowest) to five (fastest).
Max Deceleration Rate
3
This sets the rate at which the PowerMill Climber decelerates to the selected
speed, ranging from one (slowest) to five (fastest).
Minimum Speed (SPM)
20 SPM
Set the slowest speed the PowerMill can operate.
Maximum Speed (SPM)
160 SPM
Set the fastest speed the PowerMill can operate.
Page 48 of 82