background image

 

1

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important instructions that
should be closely followed during installation of
this Extended Battery Cabinet.
This product is designed for commercial/industrial
use only. This product is not intended for use with
life-support and other designated “critical” devices.

Observe the following precautions when working
with batteries:

This UPS equipment is designed for use on a
properly grounded electrical system. This
equipment is intended to be installed by a
qualified, certified electrician who must review and
approve customer-supplied wiring, circuit breakers
and earth connections to ensure compliance with
technical standards and local electrical codes.
Installation instructions and warning notices only
for use by qualified personnel are located in the

INSTALLATION

 section of this manual.

Electromagnetic Compatibility

This UPS equipment complies with the
requirements of the EMC directive 89/336/EEC,
the published technical standards and Class A
digital device pursuant to Part 15 of FCC rules.
These limits provide reasonable protection against
harmful electromagnetic interference in a
commercial environment.
This device generates, uses and radiates radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may
cause harmful interference with radio
communications. Operating this device in a
residential area is likely to cause harmful
electromagnetic interference that the user must
correct at his own expense.

Operating Environment

Operate the Extended Battery Cabinet in an indoor
environment only in an ambient temperature range
of 32°F to 104°F (0°C to 40°C). For optimum
battery life, operate the unit in an ambient
temperature range of 59°F to 77°F (15°C to 25°C).
Install the Extended Battery Cabinet in a clean
environment, free from conductive contaminants,
moisture, flammable liquids, gases and corrosive
equipment in an indoor environment.
Turn the UPS off and isolate the system before
cleaning. Use only a soft cloth, never liquid or
aerosol cleaners. Keep the front and rear vents
free of dust accumulation that could restrict air
flow.
Never block or insert any object into the ventilation
holes or other openings.
This Extended Battery Cabinet contains user
replaceable modules. No attempts should be
made to access the interior of any module. See

MODULE REPLACEMENT

 on page 9 for details

on this procedure.

!

WARNING
Lethal voltages may be present 

within this unit even when it is 

apparently not operating. Observe 

all cautions and warnings in this 

manual. Failure to do so may 

result in serious injury or death. 

Never work alone.

!

CAUTION
DO NOT dispose of battery 

modules in a fire; the battery 

module may explode.
DO NOT open or mutilate 

batteries; released electrolyte is 

harmful to skin and eyes and may 

be toxic.
A battery can present a risk of 

electrical shock and high short-

circuit current. The following 

precautions should be observed 

when working on batteries.
• Remove watches, rings and other

metal objects.

• Use tools with insulated handles.

!

CAUTION
Lead-acid batteries contain 

hazardous toxic materials. Handle, 

transport and recycle in 

accordance with local regulations.

Содержание Nfinity Extended Battery Cabinet



















Отзывы: