Liberty Pumps ALM-P1 Скачать руководство пользователя страница 4

Страница: 4 / 12

Liberty Pumps, 3 Year Limited Warranty

Liberty Pumps, Inc. warrants that pumps of its manufacture are free from all factory defects in material and workmanship for a period of

3 years from the date of purchase. The date of purchase shall be determined by a dated sales receipt noting the model and serial

number of the pump. The dated sales receipt must accompany the returned pump if the date or return is more than 3 years from the

“CODE” (date of manufacture) number noted on the pump nameplate.

The manufacturer’s obligation under this Warranty shall be limited to the repair or replacement of any parts found by the manufacturer

to be defective, provided the part or assembly is returned freight prepaid to the manufacturer or its authorized service center, and

provided that none of the following warranty-voiding characteristics are evident:

The manufacturer shall not be liable under this Warranty if the product has not been properly installed; if it has been disassembled,

modified, abused or tampered with; if the electrical cord has been cut, damaged, or spliced; if the pump discharge has been reduced

in size; if the pump has been used in water containing sand, lime, cement, gravel or other abrasives; if the product has been used to

pump chemicals or hydrocarbons; if a non-submersible motor has been subjected to excessive moisture; or if the label bearing the

serial, model, and code number has been removed.

Liberty Pumps, Inc. shall not be liable for any loss, damage or expenses resulting from installation or use of its products, or for

consequential damages, including costs of removal, reinstallation or transportation.

There is no other express warranty. All implied warranties, including those of merchantability and fitness for a particular purpose, are

limited to three years from the date or purchase.

This warranty contains the exclusive remedy of the purchaser, and, where permitted, liability for consequential or incidental damages

under any and all warranties are excluded.

7000 Apple Tree Avenue

Bergen, NY 14416

Phone 800-543-2550

www.libertypumps.com

Содержание ALM-P1












