Liberton LMG-206 S, Руководство пользователя

Страница: 3 / 22

1. Hopper plate
2. Motor housing
3. ON/OFF/ Reverse switch
4. Locking knob hole
5. Locking knob
6. Food pusher
7. Head
8. Feed screw
9. Cutting plate (fine)
10. Cutting plate (medium)
11. Cutting plate (coarse)
12. Fixing ring
13. Cutting blade
14. Sausage attachment
15. Kebbe attachment
21. Vegetable pusher
22. Vegetable cutting head
23. Vegetable cutting of tooth sets
24. Bushing
25. Shuan deduction for the sliced
tube
26. Spring
27. Strip cutter
28. Shredded cutter
29. Slice cutter
IMPORTANT SAFEGUARDS
♦
Household use only. Do not use for industrial purpose.
♦ Unplug from outlet when assembling and disassembling the unit.
♦ Close supervision is necessary, when any appliance is used near
children.
♦ When carrying the unit, be sure to hold the motor housing with both
hands. Do not carry the unit by holding only the hopper plate or
head.
♦ Do not fix the cutting blade and cutting plate, when using kebbe
attachment.
♦ Never feed food by hand. Always use food pusher.
♦ Do not grind hard food such as bones, nuts, etc.
♦ Do not grind ginger and other materials with hard fiber.
♦ Continuous running of meat grinder should be not more than 10
minutes with the following 10 minutes interval for motor cooling.
♦ Reverse function is prohibited while the appliance is operating (For
example switch “ON” knob to “R” knob or on the contrary), wait at
least one minute until grinder has come to a complete stop.
Otherwise it may cause an abnormal noise, vibration or a transitory
electric spark in the appliance. It could result easily damage to
appliance and make the user frightened.
♦ After use, there would be a little food left in the grinder head. This
is normal. There might be a bit of black metal powder adhering to
the food ground in the end. Please pick them out and throw away,
do not eat them.
♦ To avoid jamming, do not force to operate the unit with excessive
pressure.
♦ When the circuit breaker activates, do not switch on.
♦ Never try to replace the parts and repair the unit by yourself.
FOR THE FIRST TIME
♦
Check that voltage, indicated on the rating label, corresponds the
mains voltage in your home.
♦ Wash all parts (except body) in warm soapy water.
♦ Before plugging in, ensure the “ON/OFF/ Reverse switch is turned
to "OFF" position.
4 5