Libelium Waspmote Smart Parking v2, Техническое руководство

Страница: 140 / 155

Deployment and installation
9.4. Node start-up
After the node is installed, you must follow the "Magnet start-up" steps explained in the "Magnet start-up process"
section. This process is based on 3 consecutive magnet resets waiting at least one second between each reset. In
the future need of resetting the node manually, just a single magnet reset will be needed.
Once the node has been started, it will begin to run the fi rmware step-by-step as explained in the “ How the node
works ” section.
In the next video you can see how the "magnet start-up" is performed: magnet start-up .
Figure : Using the magnet to start the node
- 139 - v7.5