LI-COR LI-7200x, Инструкция по эксплуатации

Страница: 50 / 64

Section 6. Advanced operations
Sensors in System
Files to
Transfer Data
Volume
1
CO
2
/H
2
O Eddy Flux System with Biomet Data: Includes Sonic
Anemometer, Biomet Station, and CO
2
/H
2
O gas analyzer.
Raw Data <3 GB per
month
CO
2
/H
2
O/CH
4
Eddy Flux System with Biomet Data: Includes
Sonic Anemometer, Biomet System, LI-7700 and CO
2
/H
2
O
gas analyzer.
Raw Data <3.5 GB
per month
LI-8100A Soil CO
2
Flux System Raw Data <2 GB per
month
Eddy Covariance Systems with an LI-8100A Soil CO
2
Flux
system
Raw Data <4 GB per
month
Table 6-1 . Suggested data volume for eddy covariance flux and soil CO2 flux
systems. (...continued)
Recommended IP addresses
We recommend the IP addresses given in Table 6-2 below. You are not bound to
these, but they should work when following the instructions in this manual.
Sensor Suggested IP Address
Personal Computer (optional) 192.168.128.200
LI-7200x or LI-7500x 192.168.128.201
LI-7700 192.168.128.202
Biomet System 192.168.128.203
LI-8100A 192.168.128.204
Table 6-2 . Suggested IP addresses for the PC and instruments in flux systems.
Configure PC network communication
Note: This is only necessary when configuring the system. You'll do this when
configuring the gateway the first time, or when connecting to it to change the
configuration.
When connecting to a remote monitoring system you may need to configure your
computer's network settings. The steps below describe how to do this with a
1
Actual data volume will vary depending on the instrument configuration, the number of configuration
files sent to the instruments, and other factors. The values given here are assume 10 samples per second
logging of the default variable set in an LI-7500RS.
6-2 Satellite Communication