LGMG AS1932E, Руководство по эксплуатации и безопасности

Страница: 47 / 68

LGMG North America Inc.
Operation and Safety Manual
39
the machine with a forklift.
⚫
Ensure that the lifting capacity, loading
surface, loading straps, or rope of the crane
is sufficient to bear the machine weight. For
gross vehicle weight, refer to the nameplate.
8.3 Loading the Machine with
a Forklift
1) Be sure to secure the extending platform, the
controller and the chassis tray. Remove all
movable components from the machine.
2) Completely lower the platform. Keep the
platform folded in each transport process.
3) Use the forklift pockets on both sides of the
ladder.
4) Place the forks of the forklift into the forklift
pockets.
5) Drive the forklift forward to completely insert
the fork into the pockets.
6) Lift the machine by 6in (15cm) and slightly tilt
the fork backward to keep the machine
stable.
7) Keep the machine level when lowering the
fork.
△
!
Notice
Component damage may result from the
machine being lifted from its’ side.
8.4 Lifting Precautions
1) Completely lower the platform. Be sure to
secure the extending platform, the controller
and the chassis tray. Remove all movable
components from the machine.
△
!
Notice
Use the center of gravity shown on the
lifting decal on the machine.
2) A spreader bar can only be attached to the
specified lifting points on the machine as
shown.
3) There are two lifting lugs in the front panel of
the machine, and two lifting lugs in the rear of
the machine to use for lifting.
4) Adjust the lock tool in such a way that the
machine is not damaged and the machine is
kept horizontal.