LGMG AS1932E, Руководство по эксплуатации и безопасности

Страница: 36 / 68

LGMG North America Inc.
Operation and Safety Manual
28
12) Remove a retaining pin from the right
guardrail of the main platform.
13) Push the right guardrail of the main platform
from the ladder or the ground inward. Do not
place your hands in places where there may
be a pinch point.
14) Install the two retaining pins which were
removed back to the guardrail on each side.
The AS1932E platform guardrail system consists
of a folding guardrail of an extended platform and
a folding guardrail of a main platform.
1) Completely lower the platform and lock it into
the extended platform.
2) Remove the platform controller.
3) Remove the M-shaped fixed seat between the
guardrails of the main platform and the
extended platform from the inside of the
platform and place it in the platform.
4) Remove one retaining pin from the right front
part of the extended platform and fold the right
guardrail of the extended platform inward. Do
not place your hands in places where there
may be a pinch point.
5) Remove one retaining pin from the left front
part of the extended platform and fold the left
guardrail of the extended platform inward.
Prevent the front guardrail of the extended
platform from tilting over. Do not place your
hands in places where there may be a pinch
point.
6) Fold the front guardrail of the extended
platform inward. Do not place your hands in
places where there may be a pinch point.
7) Install the two retaining pins which were
removed back to the guardrail on each side.
8) Remove one retaining pin on the top right of
the door guardrail.
9) Fold the right guardrail of the main platform
from the ladder or the ground inward. Do not
place your hands in places where there may
be a pinch point.
10) Remove one retaining pin on the top left of
the door guardrail.
11 ) Fold the left guardrail of the main platform
from the ladder or the ground inward and
prevent the door guardrail from tilting over. Do
not place your hands in places where there
may be a pinch point.
12) Fold the front guardrail of the extended
platform from the ladder or the ground inward.
Do not place your hands in places where there
may be a pinch point.
13) Install the two retaining pins which were
removed back to the guardrail on each side.
On models AS2646E/ AS3246E, the platform
guardrail systems consist of folding guardrails of
extending platform and main platform. The
platform is classified into the revolving gantry
platform and the derrick drilling platform according
to the platform entrance structure. The folding
methods of the guardrails on the two kinds of
platforms are different. The folding steps of
revolving gantry platform are described below:
1) Completely lower the platform and lock the
extending platform.
2) Remove the platform controller.
3) Remove two retaining pins in the front of
extending platform inside the platform.