LGMG AS1932E, Руководство по эксплуатации и безопасности

Страница: 44 / 68

LGMG North America Inc.
Operation and Safety Manual
36
Chapter 8 Transport and Lifting
Instructions
△
!
Warning
Obey these instructions.
⚫
When lifting the machine with a crane,
ensure the crane has the proper capacity and
rigging to handle the weight of the machine.
⚫
Only qualified personnel are allowed to load
and unload the machine onto a truck for
transport.
⚫
The hauling vehicle must be parked on firm,
level ground.
⚫
When loading the machine, be sure to chock
the wheels of the hauling vehicle to ensure it
won’t move.
⚫
Ensure vehicle capacity, load surface, and tie
down equipment is adequate for bearing the
weight of the machine. Refer to the
nameplate on the machine for gross weight.
⚫
Be sure to load the machine on a flat, level
surface and chock the wheels before
releasing the brake.
⚫
Do not drive the machine when traveling up
and down a slope or when driving on a slope
exceeding the rated gradeability for the
machine. For driving on a slope, refer to
Chapter 7
– Operating Instructions. If the
loading ramp of the hauling vehicle exceeds
the maximum rated travel grade of the
machine, load and unload the machine with a
winch as per the instruction for brake
releasing operation.
8.1 Releasing the Brake
1) Chock the wheels to prevent the machine
from rolling.
2) Make sure all lifting devices are properly
fastened at the designated tie down/lifting
points on the chassis, and there are no
obstacles in the way.
3) Press the brake release button to release the
brake. Re-press the brake release button to
brake the machine after moving. (AS series
models only)
4) If system voltage is lower than 10v, operate
the drive motor according to the following
procedure.