LGMG AR45J, Руководство по обслуживанию

Страница: 12 / 33

LGMG North America Inc. Maintenance Manual
7
oil pressure, and then check the
engine oil level.
It is available in the first 50 hours, and the
engine oil and filter shall be replaced every 500
hours. (If the ambient temperature continues to
be below -10
℃
. (14
゜
F) or the temperature of
engine oil is below 60
℃
(84
゜
F), or the sulphur
content in the diesel fuel is 0.5 - 1%, the oil
change period is reduced by a half; if the engine
oil does not reach the replacement interval
period within a year, the oil shall be replaced at
least once a year.)
△
!
Danger of burn, be careful of
high-temperature engine parts and oil,
contacting with high temperature
engine oil and/or engine parts will
cause severe burns.
△
!
Perform the function after engine
warm up to normal operation
temperature.
Replacement of engine oil
△
! After the filter element is replaced,
be sure to keep the engine idling at a
low speed for at least 3-5 minutes, so
that the engine has been lubricated
before being put into operation.
Figure 1-3
1) Warm up and run the engine (engine oil
temperature> 80
℃
).
2)
Place the engine horizontally.
3)
Shut down the engine.
4) Place the container under the engine oil
drain plug.
5)
Screw off the engine oil drain plug to drain
the old engine oil.
6)
Install the new seal ring for the engine oil
drain plug and screw in and tighten it.
7) Add engine oil at the engine oil filler.
8)
Warm up and run the engine (engine oil
temperature> 80
℃
).
9)
Place the engine horizontally.
10) Check the engine oil level and fill it if
necessary.
Use temperature Oil type
Working
temperature:-20
℃～
40
℃
CH-4/15W-40
Working
temperature:-25
℃～
30
℃
CH-4/10W-30
Working
temperature:-30
℃～
30
℃
CH-4/5W-30
Working
temperature:-35
℃～
20
℃
CH-4/0W-20
Figure 1-4