LGMG AR45J, Руководство по обслуживанию

Страница: 11 / 33

LGMG North America Inc. Maintenance Manual
6
-10°C
＜
The lowest
temperature
＜
30°C
85W/90
-30°C
＜
The lowest
temperature
＜
-10°C
80W/90
The lowest temperature
＜
-30°C
75W
1.7 Checking Engine Oil
Level
△
! Do not perform maintenance on a
running engine! No smoking or open
fires are permitted! If the engine has
been operated, the engine oil will be
very hot and there is a danger of
scalding!
△
! When checking or changing
engine oil, make sure all surrounding
surfaces are clean.
△
! Observe safety regulations and
relevant local regulations for engine oil.
Dispose of spilled engine oil and filter
elements as required. Waste oil must
not drain into the ground.
△
! Test run the engine after each
procedure. Pay attention to engine oil
pressure. Check for leaks and engine
oil level after shutting down the
engine.
Check the engine oil level every 8
hours or daily.
Insufficient or excessive engine oil may cause
damage to the engine. The engine oil level can
only be checked when the engine is placed
horizontally and shut down. If the engine is hot,
shut down the engine and check the engine oil
level 5 minutes later. The oil can be checked
immediately if the engine is cool.
1)
Pull out the engine dipstick and clean it with
a clean, lint-free cloth.
2)
Fully insert the dipstick into the dipstick
tube.
3) Pull out the dipstick and read the engine oil
level.
4)
The engine oil level shall always be
between the MIN and MAX marks.
If necessary, add oil up to the maximum level.
1.8 Replacement of Engine
Oil and Filter
△
!
Do not operate on running
engines! No smoking and open fires!
Be careful when contacting with high
temperature engine oil. Danger of
scalding!
△
!
When operating on the oil system,
pay attention to the surface cleaning.
Carefully clean all areas involved. Blow
wet parts with compressed air.
△
! Please observe the safety
regulations for engine oil and relevant
local regulations. Dispose of spilled
engine oil and filter elements as
required. Waste oil cannot penetrate
into the ground.
△
! Test run shall be carried out after
each operation. At the same time, pay
attention to the sealing and lubrication