LGMG AR16J, Руководство по обслуживанию

Страница: 9 / 32

Maintenance Manual of Elevating Work Platform
4
state
Color and description of hydrometer color
 If the battery hydrometer’s color is green,
and voltage is more than 12V, but cannot drive
the starter, further check the battery circuits by
personnel with machine maintenance training
and certified to perform such work.
△
!
Caution: If charging the battery
with an external power supply, only
use a charger accepted by LGMG.
Periodic maintenance
1) Maintenance items every quarter, every
year and every two years must be
performed by personnel with machine
maintenance training and certified to
perform such work.
2) A machine not used for a time exceeding
three months must not be put into use
again until a quarterly inspection and
maintenance have been performed.
Battery hydrometer
1.3Maintenance of
worm-Type Slewing Drive
There are three positions to be lubricated on the
worm-type
slewing drive assembly, i.e.,
lubrication of the roller path (Position I),
lubrication of the engaging position (Position II)
between the worm and the slewing bearing, and
lubrication of the tapered roller bearing (Position
III). The specific lubrication positions are shown
as below:
Figure 1-1
Figure 1-2
1.3.1Maintenance before Delivery
△
!
Notice: It refers to the lubrication
of the LGMG platform for working
at heights before delivery.
1) Position 1: Lubrication of the roller path:
The roller path is full and does not need to
be lubricated again.
2) Position 2: Lubrication of the engaging
position between the worm and the slewing
bearing
3) Quantity: It is required to inject 650g of
lubricating grease.
4) Lubrication method: Continuously inject
lubricating grease into the injection port of
lubricating grease while rotating the slewing
reducer
5) Model of the lubricating grease: 3#
lubricating grease
Position 1
Position 3
Position 2
Position 3
Hydrometer