General programming
procedure with 55015 Univer-
sal Remote:
- Registers CV1 through CV4 can
be programmed directly by pro-
gramming the desired function
value in the register.
- To program higher CVs:
- In register CV6, input the num-
ber of the register you want to
program.
- Then input the desired function
value in register CV5.
Example:
Set hand-over function to ON
(program register CV54 to func-
tion value 3).
To program:
- Display shows “P --”
- Select register CV6 (press 6).
- Input 54 (register you want to
program).
- Execute programming (press
right arrow button).
- Display shows “P --”
- Select register CV5 (press 5).
- Input 3 (selected function value)
- Execute programming (press
right arrow button).
When programming with the
55045, all function values are pro-
grammed directly.
AUTHORIZED SERVICE
Improper service will void your
warranty. For quality service, con-
tact your authorized retailer or
one of the following LGB factory
service stations:
Ernst Paul Lehmann Patentwerk
Reparatur-Abteilung
Saganer Strasse 1-5
D-90475 Nürnberg
GERMANY
Telephone: (0911) 83707 0
Fax: (0911) 83707 70
LGB of America
Repair Department
6444 Nancy Ridge Drive
San Diego, CA 92121
USA
Telephone: (858) 535-9387
Fax: (858) 535-1091
You are responsible for any ship-
ping costs, insurance and cus-
toms fees.
Hint: Information on LGB prod-
ucts and LGB representatives
around the world is available
online at www.lgb.com
CAUTION! This model is not for
children under 8 years of age.
This model has small parts, sharp
parts and moving parts. Save the
supplied packaging and instruc-
tions.
Products, specifications and
availability dates are subject to
change without notice. Some
products are not available in all
markets and at all retailers. Some
products shown are pre-produc-
tion prototypes. LGB, LGB of
America, LEHMANN and the LGB
TOYTRAIN logotype are regis-
tered trademarks of Ernst Paul
Lehmann Patentwerk, Germany.
Other trademarks are the proper-
ty of their owners. © 2002 Ernst
Paul Lehmann Patentwerk.
13
