background image

22

ow to use washer

H

Start/Pause

• This 

Start/Pause

button is used  to start

wash cycle or pause the wash cycle.

• If temporary stop of wash cycle is

needed, press the 

Start/Pause

button.

• When in Pause, the power is turned off

automatically after 4 minutes.

• 

NB.

The door will not open before 1 to 2
minutes when Pause is selected, 
or at the end of the wash cycle.

1. Start

2. Pause

1. Power

2. Initial Program

Power

• Press the Power button to turn power on

and off

• To cancel the Time Delay function, the

power button should be pressed.

• When the Power button is pressed, the

washer is ready for Cotton program.
And the other initial conditions as
follows.

• So, if you want to advance into the

washing cycle without changing the
program, just press the 

Start/Pause

button and then the washer will proceed.

Initial program

[WD(M)-14331(6)AD / WD-14335AD]

- Cotton Program / Main Wash / 

Normal Rinse / 1400 rpm / 60˚C 

[WD(M)-12331(6)AD]

- Cotton Program / Main Wash / 

Normal Rinse / 1200 rpm / 60˚C

Door Lock

• Lights whenever the door of  the washer is

locked. 

• The door can be unlocked by pressing the

Start/Pause button to stop the washer. 

• The door can be opened after a short delay.

Содержание WD(M)-12331(6)AD

































Отзывы: