LG WD(M)-12331(6)AD Скачать руководство пользователя страница 10

Страница: 10 / 32

nstallation

Normal Tap without thread & screw type inlet hose

Normal Tap without thread & one touch type inlet hose

Unscrew the fixing screw to
attach the tap.

Push the connector up till the
rubber packing is in tight contact
with the tap. Then tighten the 4
screws.

Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.

Untighten the upper connector
screw.

Push the upper connector up till
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.

Connect the water supply hose
to the middle connector,
pushing the plate down.

• Your machine comes with only

cold water connection.

• Make sure that there are no

kinks in the hose and that it is
not crushed.

• Make sure that the rubber seal

is inside the hose connector.

Upper

Connector

Rubber

packing

Middle

connector

Fixing screw

Guide plate

Connector

Rubber seal

Hose connector

Used the horizontal tap

Horizontal tap

Extension tap

Square tap

Rubber packing

Upper

Connector

Middle

connector

Plate

Upper

Connector

Water supply

hose

• In case the diameter of the tap is

large remove the guide plate.

• Turn the middle connector not

to have water leaked.

• To separate the water supply

hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.

Содержание WD(M)-12331(6)AD

































Результаты поиска

Содержание WD(M)-12331(6)AD

Отзывы:

Похожие инструкции для WD(M)-12331(6)AD

Бренды по названию

Популярные бренды

LG WD(M)-12331(6)AD, Руководство пользователя

Результаты поиска

Содержание WD(M)-12331(6)AD

Отзывы:

Похожие инструкции для WD(M)-12331(6)AD

Бренды по названию

Популярные бренды