LG V-net PQNUD1S00, Инструкция для владельца и по установке, Страница: 18 / 48

How to set each Indoor Unit
18 Electricity Distribution Indicator
How to set each Indoor Unit
■
Using wired remote controller
Timer Cancel
Program Week
Hour Min
Holiday
Set/Clr
RESET
ZONE 1 2 3 4
Operation unit
Humidify
JET
AUTO
AUTO SWING OPERATION FAN SPEED
Program set
SUB FUNCTION SET TEMP
Room Temp
HI
MED
LO Heater
Defrost
Filter Preheat
Out door
Time
Timer
On
Set no. Time Off
01 03 05 07 09 11 13 15 17 19 21 23
Plasma
Group No. Indoor No.
3 A
Program
Set/Clr
3. Press the "Program" & "Setup/Clr" keys at the same time
for 3 seconds to set up the indoor address.
• The room address on the PDI is listed in the ascending order of indoor number.
Ex) If the indoor addresses are "7C", "7D", "7E" and "7F", the order of the indoor unit on the
PDI are "1", "2", "3" and "4".
• The indoor numbers must be entered in sequence to be accurately recognized in the PDI.
Ex) Correct indoor unit address setup: "01", "02", "03" (setup in order)
Incorrect indoor unit address setup: "01", "02", "06"
1. Press the "Program" &
"Set/Clr" keys at the same
time.
2. Set up the indoor address
using the temperature
adjustment key
☛
Setup range: 00-7F