Using the Battery
Battery Capacity
Your Touchpoint phone is equipped with a Lithium Ion (LiIon) battery.
It allows you to recharge your battery before it is fully drained. The battery
provides approximately 150 minutes of continuous digital talk time
(70 minutes in analog) or approximately 150 hours of continuous digital
standby time (16 hours in analog).
When the battery reaches 5% of its capacity, the battery icon blinks. When
there are approximately two minutes of talk time left, the phone sounds
an audible alert and then powers down.
Note:
Long backlight settings, searching for service, vibrate mode and
Browser use affect the battery’s talk and standby times.
Tip:
Be sure to charge your phone’s battery and watch your indicator to
ensure your levels are okay.
Installing the Battery
Your phone comes with a LiIon battery. Follow these steps to install it:
1.
Place the battery in the opening at a 45-degree angle with the metal
contacts at the bottom, facing downward.
2.
Gently press down on the battery until the latch snaps into place.
Removing the Battery
To remove your battery, follow these easy steps:
1.
Make sure the power is off so that you don’t lose any stored numbers
or messages.
2.
Push the battery release latch up.
3.
Remove the battery from the phone at a 45-degree angle.
Section 2
Getting to Know Your Phone
11
2
Getting to Know
Y
our Phone
Turning Your Phone ON and Off
Turning Your Phone ON
䊳
To turn your phone on, press
for two seconds.
Once your phone is ON, it displays “Searching for Service” while you
phone looks for a signal. When you phone finds a signal, it automatically
enters Standby mode – the phone’s idle state. At this point, you’re ready to
begin making and receiving calls.
If you phone is unable to find a signal after 15 minutes of searching, a
Power Save feature is automatically activated. When a signal is found,
your phone returns to Standby mode.
Your phone searches for a signal periodically without your intervention.
You can also initiate a search for service by pressing any key (when your
phone is turned ON).
Note:
The Power Save feature helps to conserve battery power when
you are in an area where there is no signal.
Turning Your Phone OFF
䊳
To turn your phone off, press
for two seconds.
Displaying Your Phone Number
To display your phone number:
1.
From the main menu, highlight
Phone Book
and press
.
2.
Highlight
My Phone #
and press
.
OK
OK
PWR
END
PWR
END
Section 2
10
Getting to Know Your Phone
Содержание Touchpoint TP5200
Страница 1: ...Touchpoint Phone TP5200 User Guide ...
