9
Battery Charging and Alerts
Open the
Charging Port
cover and connect the charger to the
Charging Port.
Indicator Lamp
Red
Purple
Blue
Battery Status
Charging
80%
Completed
The headset is turned off while being charged.
NOTE: If the temperature is too high or too low, the status indicator lamp
blinks in red and the battery is not charged.
For more information on the battery, go to [Additional Information] >
[4. Battery information].
Press and hold the
Volume Button (Previous
)
for one second in idle mode to check the
Indicator Lamp and battery level by voice.
Battery Status
Sufficient
Normal
Insufficient
Indicator Lamp
Blue flashes
Purple flashes
Red flashes
Vibration Alert Settings
The headset is set to Vibration Alert by default. To enable or disable
Vibration Alert, press and hold
Volume Button (Next
)
for
two seconds in idle mode.
NOTE: If you turn off the vibration alerts, it will not vibrate even when a
call is being received or you are out of communication range.
Out of Range
If the device connected to the product is out of effective communication range, the communication
signal becomes weak and the communication is lost. The effective communication range may vary
depending on surrounding and other conditions.
If the device comes back within effective communication range, the product automatically
reconnects to the device. If the device is not automatically reconnected, press the
MFB
on the
product to connect to it manually.
If a device that is not in use goes out of communication range when multiple devices are connected,
the product vibrates and a voice message indicates that the connection is lost. In this case, the
automatic reconnection function is not supported.