LG THERMA V AHBW076A0, Руководство по обслуживанию, Страница: 24 / 98

- 24 -
3.2 Control Panel Setting
How to enter installer setting mode
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it could cause problems to the unit, user injury or property dam-
age. This must be set by an certificated installer, and any installation or change that is carried out by a non-certifi-
cated person should be responsible for the results. In this case, free service cannot be provided.
CAUTION
?)<-: ?)<-:
<-58 <-58
78-: 78-:
0-)<16/ 0-)<16/
57,- 57,-
1
Function Code Value
Press Function Setting button for 3 seconds
to enter the installer setting mode.
(When you enter the installer setting mode ini-
tially, function code is displayed on the bottom of
the LCD screen.)
Repeat pressing button, and the function code
will be changed from 01 to 2F.
Please refer the code table on the next page.