background image

CAUTION

• Two or more people must lift and transport the product. Avoid personal injury. 

• Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause cor-

rosion on the product. 

• Install the drain hose to ensure that the condensed  water is drained away properly. A bad connection

may cause water leakage.

• Keep level even when installing the product. To avoid vibration or noise.

• Do not install the product where the noise or hot air from the outdoor unit could damage or  disturb

the neighborhoods. It may cause a problem for your neighbors and hence dispute.

• Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant levels

may cause failure of product.

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a con-

sumer air conditioner, not a precision refrigeration system. There is risk of damage or loss of property.

• Do not block the inlet or outlet of air flow. It may cause product failure.

• Use a soft cloth to clean. Do not use harsh detergents, solvents or splashing water etc. There is risk

of fire, electric shock, or damage to the plastic parts of the product.

• Do not touch the metal parts of the product when removing the air filter. There is risk of personal injury.

• Do not step on or put anyting on the product. (outdoor units) There is risk of personal injury and failure

of product.

• Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if nec-

essary. A dirty filter reduces the efficiency.

• Do not insert hands or other objects through the air inlet or outlet while the product  is operating.

There are sharp and moving parts that could cause personal injury.

• Be cautious when unpacking and installing the product. Sharp edges could cause injury.

• If the  refrigerant gas leaks during the repair, do not touch the leakaing refrigerant gas. The refrigernat

gas can cause frostbite (cold burn)

• Do not tilt the unit when removing or uninstalling it. The condensed water inside can spill .

• Do not mix air or gas other than the specified refrigerant used in the system. If air enters the refriger-

ant system, an excessively high pressure results, causing equipment damage or injury.

• If the refrigerant gas leaks during the installation, ventilate the area immediately. Otherwise it can be

harmfull for your health.

• Dismantling the unit, treatment of the refrigerant oil and eventual parts should be done in accordance

with local and national standards. Replace the all batteries in the remote control with new ones of the
same type. Do not mix old and new batteries or different types of batteries. There is risk of fire or
product failure.

• Do not recharge or disassemble the batteries. Do not dispose off batteries in a fire. They may burn or

explode.

• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not

use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other
health hazards.

• Do not let the air conditioner run for a long time when the humidity is very high and a door or a win-

dow is left open. Moisture may condense and wet or damage furniture.

• Do not expose your skin  or kids or plants to the cool or hot  air draft. This could harm to your health.

• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if the

batteries have leaked. The chemicals in batteries could cause burns or other health hazards.

• Do not drink the water drained from the product. It is not sanitary and could cause serious health issues. 

• Use a firm stool or ladder when cleaning, maintaining or repairing  the product at an height. Be careful

and avoid personal injury.

!

IMPORTANT SAFETY INSTRUCTIONS

5

ENGLISH

Содержание SX092CL NL1






















Отзывы: