background image

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product

WARNING

It can result in serious injury or death when the directions are ignored

CAUTION

It can result in minor injury or product damage when the directions are ignored

WARNING

• Always use a power plug and socket with a ground terminal. There is a risk of electric shock.

• Do not use a defective or underrated circuit breaker. Use the correctly rated breaker and fuse. There

is risk of fire or electric shock .

• Do not use a multi consent. Always use this appliance on a dedicated cicuit and breaker. Otherwise it

can cause electric shock or fire.

• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center.

Do not disassemble or repair the product by yourself. There is risk of fire or electric shock.

• Always ground the product as per the wiring diagram. Do not connect the ground wire to gas or water

pipes lightening rod or telephone ground wire. There is risk of fire or electric shock.

• Install the panel and the cover of control box securely. There is risk of fire or electric shock due to

dust , water etc.

• Use the correctly rated breaker or fuse. There is risk of fire or electric shock.

• Do not modify or extend the power cable. If the power cable or cord has scrathes or skin peeled off or

deteriorated then it must be replaced. There is risk of fire or electric shock.

• For installation, removal or reinstall , always contact the dealer or an Authorized Service Center. There

is risk of fire, electric shock, explosion, or injury.

• Do not install the product on a defective installation stand. Be sure that  the installation area does not

deteriorate with age. It may cause product to fall. 

• Never install the outdoor unit  on a  moving base  or a place from  where  it can fall down. The falling

outdoor unit can cause damage or injury or even death of a person.

• When the product is soaked (flooded or submerged) in water , contact an Authorized Service Center

for repair before using it again. There is risk of fire or eletric shock.

• In outdoor unit the step-up capacitor supplies high voltage electricity to the electrical components. Be

sure to discharge the capacitor completely before conducting the repair work. An charged capacitor
can cause electrical shock.

• When installing the unit, use the installation kit provided with the product. Otherwise the unit may fall

and cause severe injury.

• Be sure to use only those  parts which are  listed in the svc  parts list. Never attempt to modify the equip-

ment. The use of inappropriate parts can cause an electrical shock, excessive heat generation or fire.

!

!

!

IMPORTANT SAFETY INSTRUCTIONS

3

ENGLISH

Содержание SX092CL NL1






















Отзывы: