background image

2

3

IMPORTANT SAFETY INSTRUCTIONS 

READ ALL INSTRUCTIONS BEFORE USE 

w

Warning

 

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric 

shock, or to prevent property damage, injury to persons, or death. 

  Your safety and the safety of others is very important.

   We have provided many important safety messages in this manual and on your appliance. Always read and obey all 

safety messages.

  This is the safety alert symbol. 

  This symbol alerts you to potential hazards that can kill or hurt you and others.

  All safety messages will follow the safety alert symbol and either the word DANGER, WARNING, or CAUTION.
  These words mean:

 w

DangEr

  You will be killed or seriously injured if you don’t immediately follow instructions. 

 w

Warning

 

   You can be killed or seriously injured if you don’t follow instructions.  

 w

caution

   You may be slightly injured or cause damage to the product if you do not follow instructions. 
   All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell 

you what can happen if the instructions are not followed.

•  Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is 

installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with 

clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint. These 

conditions will obstruct clothes dryer airflow and increase the risk of fire.

•  Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this appliance or any 

other appliances.

•  Installation and service must be performed by a qualified installer, service agency, or the gas supplier.
• Install the clothes dryer according to the manufacturer’s instructions and local codes.
• Save these instructions.

WHAT TO DO IF YOU SMELL GAS:

 

1. Do not try to light a match or cigarette, or turn on any gas or electrical appliance.
2. Do not touch any electrical switches. Do not use any phone in your building.
3. Clear the room, building, or area of all occupants.
4. Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions 

carefully.
5. If you cannot reach your gas supplier, call the fire department.

taBLE oF contEntS

iMPortant SaFEtY inStructionS

TABLE OF CONTENTS   

3

 

IMPORTANT SAFETY INSTRUCTIONS

What to Do if You Smell GaS

BaSic SafetY PrecautionS 

GrounDinG inStructionS

SafetY inStructionS for inStallation

SafetY inStructionS for connectinG 
electricitY

8

 

PRODUCT FEATURES

9

 

INTRODUCING YOUR DRYER

Parts

accessories

10 

control Panel features

11 

Display

12

 

INSTALLATION INSTRUCTIONS

12 

Preview installation order

13 

installation location requirements

13 

clearances

14 

leveling the Dryer

15 

reversing the Door

16 

installing the Side Vent Kit

17 

Venting the Dryer

19 

connecting Gas Dryers

21 

connecting electric Dryers

22  Special requirements for manufactured or 

mobile homes

22  final installation check
23  installation test (Duct check)

25

 

HOW TO USE

25

  operating the Dryer

26  cycle Guide
27  Sorting load
27  loading the Dryer
27  check the lint filter Before every load
28  cycle setting buttons
29  Special functions
29   custom Program

30

 

MAINTENANCE

30  regular cleaning

31

 

TROUBLESHOOTING

31 

Before calling for Service

33

 

SPECIFICATIONS

33

 

USING SMART DIAGNOSIS

TM

 

Содержание RN1881EZ





































Отзывы: