LG RN1881EZ, Руководство пользователя

Страница: 14 / 36

14 15
Clearances (cont.)
recommended InstallatIon spacIng for cabInet InstallatIon
• For cabinet installation with a door, minimum ventilation openings in the top of the cabinet are required.
*Required spacing
**For side or bottom venting,
2 inches (5.1 cm) spacing is allowed.
1"* (2,5 cm)
5 "**
(14 cm)
1/2
77
1/2
"
(196,8 cm)
3"* (7,6 cm)
6"* (15,2 cm)
3"* (7,6 cm)
27"
(68,6 cm)
1"
(2,5 cm)
1"
(2,5 cm)
24 in. 2*
(155 cm 2 )
48 in. 2*
(310 cm 2 )
Closet Door Vent
Requirements
Requisitos de ventilación
de la puerta del armario
(2,54 cm) (2,54 cm)
(7,6 cm)
(7,6 cm)
(7.6 cm)
(7.6 cm)
(68,6 cm)
(2.54 cm) (2.54 cm) (68.6 cm)
28
(73.4 cm)
7"* (17.8 cm) 7"* (17.8 cm)
5"*
(12.7 cm)
1"*
(2.5 cm) (68.6 cm)
1"
(2.54 cm)
1"
(2.54 cm)
(2,54 cm) (2,54 cm)
(7,6 cm)
(7,6 cm)
(68,6 cm)
28
(73,4 cm)
7"* (17,8 cm) 7"* (17,8 cm)
5"*
(12,7 cm)
1"*
(2,5 cm)
27 "
(68,6 cm)
1"
(2,54 cm)
27 "
1"
(2,54 cm)
28
(73,4 cm)
7"* (17,8 cm) 7"* (17,8 cm)
5"*
(12,7 cm)
1"*
(2,5 cm) (68,6 cm)
1"
(2,54 cm)
1"
(2,54 cm)
14" max.*
(35.6 cm)
21 1 /
4
"
(54 cm)
28
15
/
16
"
(73.4 cm)
50 1 /
4
"
(127.5 cm)
5"**
(12.7 cm)
40
3
/
16
"
(102 cm)
14" max.*
(35,6 cm)
21 1 /
4
"
(54 cm)
28
15
/
16
"
(73,4 cm)
50 1 /
4
"
(127,5 cm)
5"**
(12,7 cm)
40
3
/
16
"
(102 cm)
14" max.*
(35,6 cm)
21
1
/
4
"
(54 cm)
28 15 /
16
"
(73,4 cm)
50 1 /
4
"
(127,5 cm)
5"**
(12,7 cm)
40 3 /
16
"
(102 cm)
27 "
Leveling the Dryer
w
Warning
• To reduce the risk of injury to persons, adhere to all
industry recommended safety procedures including
the use of long sleeved gloves and safety glasses.
Failure to follow this warning can cause serious injury
or death.
• The appliances are heavy. Two or more people are
required when installing the dryer.
Failure to follow
this warning can cause serious injury or death.
To ensure that the dryer provides optimal drying
performance, it must be level. To minimize vibration,
noise, and unwanted movement, the floor must be a
perfectly level, solid surface.
1. Position the dryer in the final location. Place a level
across the top of the dryer.
• All four leveling feet must rest solidly on the floor.
Gently push on the top corners of the dryer to make
sure that the dryer does not rock from corner to corner.
If you are installing the dryer on the optional pedestal,
you must use the leveling feet on the pedestal to
level the dryer. The dryer leveling feet should be fully
retracted.
2. Use an adjustable wrench to turn the leveling feet.
Turn clockwise to raise the dryer or counterclockwise
to lower it. Raise or lower the leveling feet until dryer
is level from side to side and front to back.
Make sure that all 4 leveling feet are in firm contact with
the floor.
Level
Leveling Feet
w
Warning
• To avoid damage to the dryer or the door, support
the door with a stool or box that fits under the
door, or have an assistant support the weight of the
door.
• Avoid dropping the door to avoid damage to the
door or the floor.
THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure
to follow the instructions below can result in damage to
the dryer, property damage or injury to persons.
1. Open the door and remove the two plastic hole caps
on the catch side by gently prying up with a flat blade
screwdriver. Save these for step 6.
2. While supporting the door, remove the 4 screws, two
from each hinge. Set the door aside face down on a
protected surface to prevent damage to the door or
the work surface.
3. With the door on a protected surface, remove the 12
screws on each side of the door and lift off the inner
door frame using a flat blade screwdriver. Remove the
latch hook and blank and move them to the opposite
side.
Hole cap
Hinge screw
Inner door
frame
Latch hook
notE
Adjust the leveling feet only as far as necessary to
level the dryer. Extending the leveling feet more than
necessary can cause the dryer to vibrate.
inStaLLation inStructionS inStaLLation inStructionS