LG RJP-201M, Инструкция по установке и настройке

Страница: 11 / 24

11
Connections to TV Display Panel
RS-232C IN
(SERVICE ONLY)
AUDIO IN
VIDEO AUDIO
RGB IN (PC)
VIDEO AUDIO
L(MONO) R
2
1
L R
/DVI IN
COMPONENT IN
AV IN 1
UPDATE RESET
(RGB/DVI)
REMOTE
CONTROL OUT
SPEAKER OUT
(8 )
RJP
After completing connections between the RJP and the TV display panel, be sure the installer menu items have
been updated to enable the RJP. Installer Menu item 040 Auto Camport needs to be set to 000 and 093 RJP
Available needs to be set to 005 or 006.
(See TV installation guide for complete instructions on new TV installations.) A brief description of each of the
available RJP connections is provided below.
Digital Video
Cable
6-Pin RJ-11
Phone Cable
Network Cable
(8-Pin RJ-45)
w/Black
Protective
Sleeve
Power Cord
Audio Cable
(L-R)
Control
Cable
- TV/STB Installer Menu Item 093 RJP Available must have options 005 and 006 to be compatible.
Be sure to make all RJP connections before setting installer items.
Note:
- The actual appearance of the TV display panel
connections etc., may be different than shown
in this drawing.
- Installer Menu Item 093 RJP Available
(HDMI) for HDMI set to 005
(Digital video & Audio) for DVI set to 006
Network Port (8-Pin RJ-45)
Connect to LAN wall jack, if available. Allows the end-user to
access the LAN (local area network) server of the institution.
Phone Port (6-Pin RJ-11)
Connect to telephone line wall jack. Allows the end-user, using a
computer modem, to connect to their ISP (Internet Service
Provider) to access the Internet through a local phone line.
AC Power Cord (Installed on RJP)
Connect to standard 120V 60Hz AC power outlet.
(Four 120 Volt 60 Hz AC power outlets are provided for
the end user.
However, 7 Amps. is the maximum combined current
allowed for the AC outlets.)