System Setting
24
S
ys
tem Se
tting
3
Editing Programme List
(Channel Edit)
You can remove any digital TV or radio programs
stored on this recorder using the [Channel Edit]
menu.
1.
Display [Setting] menu.
2.
Use
w/s
to select [DTV], and press ENTER (
b
).
3.
Use
w/s/a/d
to select [Channel Edit] and
press ENTER (
b
).
4.
Press
w/s
to select [DTV] and use
a/d
to
select [DTV] or [RADIO] programme list.
5.
Use
w/s/a/d
to select a programme you
want to skip from the list, and press red (
R
)
coloured button.
If you do not want to skip the programme,
select the programme and press red (
R
)
coloured button again.
Use
w/s/a/d
to select and press ENTER
(
b
) to programme you want to lock from the
list, and press green (
G
) coloured button.
If you do not want to lock the programme,
select the programme and press green (
G
)
coloured button again.
6.
Press BACK (
1
) to return to the previous step.
Skip :
If the programme is assigned to skip, you
can’t select that programme with CH button in
Remote control.
Block/unblock :
If the programme is assigned
to block and [DTV Lock] in the [Setting] menu is
set to [Lock], you should enter the password to
watch the programme.
Channel Number Edit :
Choose a channel you
want. Press yellow (
Y
) coloured button and then
change the channel number by using
w/s/
a/d
,
and press ENTER (
b
)
FAV
Set as Favourite :
You can display favourite
channel list using the FAV button and switch
into other favourite channel on the channel list.
(see page 32.)
Lock System
Allows you to set up specific programs and
ratings through blocking schemes. Also allows
you to activate or disable all of the lock schemes
previously set up. A password is required to gain
access to the lock menu options. When the Lock
System is set to [OFF], the Block Programme and
Parental Guidance are not effective. The Lock
System option is effective for Block Programme and
Parental Guidance options.
1.
Display [Setting] menu.
2.
Use
w/s
to select [LOCK] and press ENTER
(
b
).
3.
Input the password using numerical buttons.
4.
Use
w/s
to select [Lock System] and press
ENTER (
b
).
5. Use
w/s
to select [On] and press ENTER
b
) to
activate the Lock System.
6.
Select [Close] and press ENTER (
b
).
Setting the Block Programme
1.
Display [Lock System]] menu.
2.
Use
w/s
to select [Block Programme] and
press ENTER (
b
).
3.
Use
w/s/a/d
to select and press ENTER
(
b
) to programme you want to lock from the
list, and press green (
G
) coloured button.
If you do not want to lock the programme,
select the programme and press ENTER (
b
).
Then press green (
G
) coloured button again.
4.
Press BACK (
1
) to exit the block programme
menu.
