41
MAINTENANCE
EN
means it must be cleaned regularly to
remove any build-up of lime scale on the
surface of the sensor.
Wipe the sensors inside the drum.
CAUTION
• Do not wipe the moisture sensor with
abrasive materials. Always clean the
sensor with a dry rough acrylic sponge.
Cleaning the Cool Air Inlet Grill
Vacuum the cool air inlet grill 3 - 4 times
a year to make sure there is no build up
of lint or dirt that may cause improper air
flow.
NOTE
• Warm air is expelled through the
ventilation grill.
• Adequate room ventilation should be
provided to avoid the back flow of
gases into the room from units
burning other fuels, such as open fires.
Care in Cold Climates
If the ambient temperature is too low,
the condensed water inside the
appliance may be frozen and affect the
appliance operation. When the
condensed water freezes thawing your
appliance is necessary by referring to the
following instructions.
NOTE
•
OE
message or
E
icon appears on the
display when the condensed water
inside the appliance is frozen.
Thawing out the Accessories
In case of optional drain hose
• Wrapping the optional drain hose with
a towel soaked in hot water at 60
℃
.
In case of water container
• Immerse the water container in hot
water at 60
℃
.
