LG PQRCVSL0, Инструкция для владельца и по установке

Страница: 9 / 38

Owner’s & Installation Manual 17
E
N
G
L
IS
H
16 New Wide Wired Remote Controller
Installation Instructions
Function Code Pressure
Press and hold the button
for 4 seconds to enter the
installer setting mode. The timer
will display 01:01. 1
Select static pressure by pressing
button.
(01:V-H, 02:F-H, 03:V-L, 04:F-L)
3
Press button to save.
4
5
Pressing the button will exit the settings
mode. If is not pressed, the remote
controller will automatically exit setup mode
after 25 seconds with no input.
If the set button is not pressed, the changes
will not take effect.
If pressing button repeatedly, it
moves to static pressure selection menu
as pictured below. 2
Installer Setting - Static Pressure Setting
This function is applied to only duct type indoor units. Setting this in other cases will cause malfunction.
Pressure selection
Function
Zone state ESP standard value
01 V-H Variable High
02 F-H Fixed High
03 V-L Variable Low
04 F-L Fixed Low
Static Pressure Setting Table
Function Code Thermistor setting
Select ceiling height value by pressing
button. (01:Low, 02:Medium,
03:High, 04:Very high)
3
Press button to save.
4
5
If moving to ceiling height selection menu by
pressing button, it indicates as pictured
below. 2
Pressing and holding the button
for 3 seconds enters the remote
controller setup mode. If it is not held
for 3 seconds, it enters the user setup
mode.
1
Pressing the button will exit the settings
mode. If is not pressed, the remote
controller will automatically exit setup mode
after 25 seconds with no input. If the set
button is not pressed, the changes will not
take effect.
Installation Instructions
Installer Setting - Ceiling Height Selection
This function is to adjust FAN Airflow rate according to ceiling height (for ceiling type product)
•
Ceiling height setting is available only for some products.
•
Ceiling height of ‘Very high’ function may not exist depending on the indoor unit.
• Refer to the product manual for more details.
Ceiling Height Level Description
01 Low Decrease the indoor airflow rate 1 step from standard level
02 Medium Set the indoor airflow rate as standard level
03 High Increase indoor airflow rate 1 step from standard level
04 Very high Increase indoor airflow rate 2 steps from standard level
Ceiling Height Selection Table