LG PQRCVSL0, Инструкция для владельца и по установке

Страница: 7 / 38

Owner’s & Installation Manual 13
E
N
G
L
IS
H
12 New Wide Wired Remote Controller
Installation Instructions
If entering into ESP setup mode by using
button, it indicates as pictured below.
2
Select ESP fan step by pressing
button. (01: very low, 02: low,
03: medium, 04: high, 05: very high)
3
Move to ESP value setting by pressing
button.
(It is 000 when delivered
from the warehouse.) 4
Press button to setup ESP value.
(It is possible to set up ESP
value from 1 to 255, and 1 is
the smallest and 255 is the
biggest.)
5
Function code,
ESP code
ESP value
Pressing and holding the
button for 3 seconds enters the
remote controller setup mode. If it
is not held for 3 seconds, it enters the
user setup mode.
1
Function Code ESP value
ESP step
Installer Setting - E.S.P.
• If ESP is set incorrectly the air conditioner may malfunction, which is why this setting should only be
done by a certified technician.
This function allows the wind strength for each fan speed level to be set manually.
It's the function to use for connecting central control.
Please refer to central controller manual for the details
Function Code
Group No
Indoor No.
Set Group No. by pressing
button.(0~F) 3
Move to Indoor No. setting option
by pressing button. 4
Set Indoor No. by pressing
button.
5
Press button to save. 6
Pressing the button will exit the settings
mode. If is not pressed, the remote
controller will automatically exit setup mode
after 25 seconds with no input. If the set
button is not pressed, the changes will not
take effect.
7
If entering into address setup mode by using
button, it indicates as pictured below.
2
1 Pressing and holding the button
for 3 seconds enters the remote
controller setup mode. If it is not held
for 3 seconds, it enters the user
setup mode.
Installation Instructions
Installer Setting - Setting Address of Central Control
• When setting ESP value on the product without very weak wind or power wind function, it
may not work.