LG PH300, Руководство пользователя

Страница: 21 / 86

21
PREPARATION
Installation
Installation Precautions
• Place the projector in a well-
ventilated environment.
-
To prevent internal
overheating, install the
projector in a well-ventilated
place.
Do not place anything near
the projector. That may block
its air vents. If the air vents
are blocked, the internal
temperature of the projector
will increase.
-
Do not place the projector
on a carpet or rug. If the
projector's inlet vent is on
the bottom, be careful not to
block the vent and always
use the projector on a solid,
level surface.
-
Be sure to prevent foreign
objects such as paper debris
from entering the projector.
-
Leave an adequate open
area (30 cm or more) around
the projector.
• Do not install the projector in a
hot or humid environment.
-
Only install the projector
in a place of moderate
temperature and low
humidity.
•
Do not install the projector in a
place where it can attract dust.
-
There is a risk of fire.
• Never open any cover on the
projector. There is a high risk of
electric shock.
• This projector is manufactured
using high-precision technology.
You may, however, see tiny
black dots and/or bright colored
dots that continuously appear
on the projector screen.
This is a normal result of the
manufacturing process and
does not indicate a malfunction.
• The remote control may not
work in an environment where
a lamp equipped with electronic
ballasts or a three-wavelength
fluorescent lamp is installed.
Replace the lamp with an
international standard lamp
for the remote control to work
normally.