26
Using the PROJECTOR
Using the Keystone
Function
To prevent the screen image from
becoming trapezoidal, Keystone adjusts
the top and bottom width of the image
if the projector is not set at a right angle
to the screen.
Because the
Keystone
function may
cause inferior screen image quality, use
this function only when it is not possible
to set up the projector at an optimal
angle.
•Keystone 0
-
+
CLOSE
1
Press the
SETTINGS
button.
2
Press the
︿, ﹀, ︿
or
﹀
button to
select
OPTION
and press the
OK
button.
3
Press the
︿, ﹀, ︿
or
﹀
button to
select
Keystone
and press the
OK
button.
4
Press the
︿
or
﹀
button to adjusted
Keystone.
y
Keystone
can be adjusted from
-40
to
40
.
5
Press the
OK
button after
adjustment.
Using the Input List
Using the Input List
1
Press the
INPUT
button to access
the input sources.
-
The connected input mode appears
first. However, AV / Component
input is always activated.
Input List
TV
AV
Component
USB
RGB-PC
HDMI
ꔂ Move ꔉ OK
Exit
Input Label
WiDi
2
Select an input signal using the
INPUT
button and the projector is switched
only to the connected input mode. You
can use the
︿, ﹀, ︿
or
﹀
button to
switch between all the input modes.
Adding an Input Label
Displays which devices are connected to
which input ports.
Input Label
AV
◀
▶
Component
◀
▶
RGB-PC
◀
▶
HDMI
◀
▶
Close
1
Press the
INPUT
button to access
the input sources.
2
Press the
BLUE
button.
3
Use the
︿
or
﹀
button to scroll to
one of the input sources.
4
Use the
︿
or
﹀
button to select one
of the input labels.
