29
WATCHING WITH THE PROJECTOR
HDTV reception
1
Connect an RF cable to the connec-
tor port on the bottom of the antenna.
If the cable is not long enough, you
can use a coaxial cable.
2
Connect the other end of the cable to
the Antenna In port of the projector.
3
Attach the antenna to a wall near a
window temporarily and use the Auto
Tuning function of the projector to
tune channels.
?
CHANNEL
• Auto Tuning
• Manual Tuning
• Channel Edit
4
Install the antenna in a place with
the best reception using the signal
strength indicator.
Antenna Installation
1
When attaching the antenna to a
window, clean the window with a dry
cloth fi rst. You may also hang the
antenna on a wall with a hook or ring.
2
Remove the tape from the backside
of the Velcro tape and attach the tape
while trying not to touch the sticky
side with your fi ngers.
3
Check if the tape is securely fi xed
after 10 minutes and attach the an-
tenna.