26
MAGIC REMOTE CONTROL
Pairing the Magic Remote Control
y
y
You must pair the magic remote control with the projector to use it.
y
y
Pair the magic remote control prior to use as follows:
1
Turn on the projector and press the
HOME
ⰶᲳ
ㄮᗺ
ⱞⳮ
Ẳⱞ⩛
/
ხ㢢☎⳿
?
wheel (OK) button toward the projector. When the
pairing is complete, the pairing completion message is displayed on the projector screen.
2
If you failed to pair the magic remote control, turn the projector off and on and try pairing again
by pressing the
HOME
ⰶᲳ
ㄮᗺ
ⱞⳮ
Ẳⱞ⩛
/
ხ㢢☎⳿
?
wheel (OK) button.
Re-pairing the Magic Remote Control
1
Press the
HOME
ⰶᲳ
ㄮᗺ
ⱞⳮ
Ẳⱞ⩛
/
ხ㢢☎⳿
?
HOME button and
ꕣ
BACK button at the same time for about 5 seconds.
The Magic remote control is paired again when you press the
HOME
ⰶᲳ
ㄮᗺ
ⱞⳮ
Ẳⱞ⩛
/
ხ㢢☎⳿
?
wheel (OK) button toward
the projector.
2
You can also re-pair it by pressing the
ꕣ
BACK button toward the projector for about
5 seconds. At this point, the Magic remote control is initialized. When the pairing is
complete, the pairing completion message is displayed on the projector screen.
Using the Magic Remote Control
1
Shake the Magic remote control lightly when there is no pointer dis-
Shake the Magic remote control lightly when there is no pointer dis-
Shake the Magic remote control lightly when there is no pointer dis-
played on the screen. A pointer will be displayed on the screen.
→ The pointer disappears if the remote controller is not used for a certain
period of time.
2
When you move the pointer signal transmitter up/down/left/right while pointing it
toward the projector, the pointer moves.
→ If the pointer is not working properly, do not move the magic remote control for about 10
seconds, and then move it again.
NOTE
y
y
Use the remote control within the specified range (within 10 meters.) You may experience
communication failures when using the device outside the coverage area or if there are ob-
stacles within the coverage area.
y
y
You may experience communication failures depending on the accessories.
Devices such as a microwave oven and wireless LAN operate in the same frequency band (2.4
GHz) as the Magic remote control. This may cause communication failures.
y
y
The Magic remote control may become damaged or may malfunction if it is dropped or re-
ceives a heavy impact.
y
y
Take care not to bump into nearby furniture, electronics or other people when using the Magic
remote control.