Operating
34
Oper
ating
3
Programmed Playback
The program function enables you to store your
favorite files from any disc or USB device.
A program can contain 20 tracks/files for each
media. (CD, USB1,USB2) Possible to save a total of
60 tracks/files.
Making Programmed list
It is supported only on stop status.
1. Press
PROGRAM/MEMORY
on the remote
control.
2. Press
C
/
V
on the remote control to select
a track/file.
3. Press
PROGRAM/MEMORY
on the remote
control to save and select a next track/file.
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET.FOLDER
W
/
S
on the remote control
to select the program number.)
5. Press
PROGRAM/MEMORY
on the remote
control once again.
To play the programmed list, press
d/M
after you
make the list.
When making or modifying the programmed
list, REPEAT mode is off.
,
Note
Deleting Programmed list
Deleting function only works in the edit mode.
1. Press
PROGRAM/MEMORY
on the remote
control in stop status.
2. Select a song by pressing
PROGRAM/MEMORY
or
PRESET.FOLDER
W
/
S
on the remote
control repeatedly.
3. Press
DELETE
while a song is selected.
y
Program is switched off in the case below.
-
Changing to a different function.
-
Turning off and on the unit.
-
Operating the numeric buttons on the
remote control.
y
Programmed list is cleared in the case
below.
-
Removing the disc or the USB device.
-
Deleting or recording music files in the
USB device.
-
Unplugging the Power Cord.
,
Note
OM7550-FB.DUSALLK_FULL BOOK_ENG_MFL69001813.indd 34
2015-08-31 4:05:40
