Connecting
19
C
onnecting
2
AUX OUT Connection
Connect an input of auxiliary device to the
AUX
OUT
(L/R) connector.
If your device has only one input for audio(mono),
connect it to the left audio jack on the unit.
Auxiliary device
Audio cable
X-BOOM PLUS
You can connect two units to play music together
.
1. Connect
AUX OUT
connector on a unit to the
AUX IN
connector on the other unit using
Audio cable.
2. Press
X-BOOM PLUS
on the unit connected
through AUX OUT.
X-BOOM PLUS is displayed.
3. Rotate
SCRATCH / CONTROL
clockwise or
counterclockwise to adjust Delay setting.
4. Press
X-BOOM PLUS
to save the Delay setting.
y
This function
is available on CD, USB 1, USB
2, BT or PORTABLE Function.
y
The initial Delay is 0 ms and the Delay
becomes to 30 ms when you press
X-BOOM
PLUS
. The connected device’s Delay may
differ. If Audio Sync is not matched, adjust
Delay of
X-BOOM PLUS
to synchronize
sound.
y
It is available to adjust the Delay from 0
ms to 100 ms. Synchronizing tempo is not
available depending on devices.
y
Delay value is saved when the unit turns off.
,
Note
PORT. IN Connection
Connect an output (earphone or line out) of
portable device (MP3 or PMP etc) to the
PORT. IN
connector.
B
Portable cable
MP3 player etc.
OM7550-FB.DUSALLK_FULL BOOK_ENG_MFL69001813.indd 19
2015-08-31 4:05:37