LG MultiSITE MS8250, Руководство по установке

Страница: 9 / 32

9
Installation Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
CHOOSING A LOCATION
A trained technician should always install the controller following local, national, and federal electrical codes; industry best
practices; the instructions in this manual; and using the proper tools and test instruments.
Failure to carefully read and follow all instructions will result in personal injury or death.
Discharge yourself correctly before handling and installing the controller.
There is risk of electric shock and physical injury or death.
Ensure the system is connected to a power source that provides adequate power. Ensure that the wiring is the correct size.
If the power source capacity is inadequate, the wiring is not the correct size, or the electric work is not performed properly, it will result in short circuit-
ing, fire, electric shock, physical injury or death.
A trained technician should always install the controller following local, national, and federal electrical codes; industry best
practices; the instructions in this manual; and using the proper tools and test instruments.
Failure to carefully read and follow all instructions will result in equipment malfunction, controller and property damage, and will void the manufac-
turer's warranty.
This device is only intended for use as a monitoring and control device. It is not a safety device. Do not use it for any other
purpose.
Tampering with the devices or unintended application of the devices will result in a void of warranty. There also is risk of data loss or equipment dam-
age.
Ensure the system is connected to a power source that provides adequate power. Ensure that the wiring is the correct size.
If the power source capacity is inadequate, the wiring is not the correct size, or the electric work is not performed properly, it will result in controller
malfunction, miscommunication, and / or degraded performance.
Install the controller at least eight (8) inches away from inhabitants, and do not locate near or operating in conjunction with
any other antenna or transmitter.
There is risk of controller malfunction, miscommunication, and / or degraded performance.
Perform preventive maintenance on the damper and VAV box, according to manufacturer's instructions.
There is risk of product malfunction, miscommunication, and / or degraded performance.
Choosing a Location for the Controller