LG MultiSITE MS8250, Руководство по установке

Страница: 5 / 32

5
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Installation Manual
5
SAFETY PRECAUTIONS
Discharge yourself correctly before handling and installing
the controller.
There is risk of electric shock and physical injury or death.
Install in a controlled environment relatively free of contami-
nants.
There is risk of electric shock and physical injury or death.
Secure all field wiring connections with appropriate wire
strain relief.
Improperly securing wires will create undue stress on equipment power
lugs. Inadequate connections will generate heat, cause a fire and physi -
cal injury or death.
Ensure the system is connected to a power source that pro-
vides adequate power. Ensure that the wiring is the correct
size.
If the power source capacity is inadequate, the wiring is not the correct
size, or the electric work is not performed properly, it will result in short
circuiting, fire, electric shock, physical injury or death.
Do not change the settings of the protection devices.
If the protection device is shorted and forced to operate improperly, or
parts other than those specified by LG are used, there is risk of fire,
electric shock, explosion, and physical injury or death.
Properly tighten all power connections.
Loose wiring may overheat at connection points, causing a fire, physical
injury or death.
Dispose of any packing materials safely.
• Packing materials, such as nails and other metal or wooden parts
will cause puncture wounds or other injuries.
• Tear apart and throw away plastic packaging bags so that children
may not play with them and risk suffocation and death.
Do not install the controller if it will be exposed to rain
or other precipitation. Do not install the unit in a location
exposed to open flame, extreme heat, or direct sunlight.
Do not touch the unit with wet hands.
There is risk of fire, electric shock, physical injury, and/or death.
Use a soft, pre-moistened lint-free cloth for cleaning.
Avoid getting moisture in openings.
If moisture accesses the electrical components of the controller, there is
risk of fire, electric shock, and physical injury or death.
Do not use caustic / corrosive products, ammonia, sol-
vents or any cleaning product containing alcohol or grit.
There is risk of fire, electric shock, and physical injury or death.
Do not drop or crush the controller, or allow it to come
into contact with liquids.
There is risk of fire, electric shock, and physical injury or death.
Do not spray anything directly on the controller or use
compressed air.
There is risk of fire, electric shock, and physical injury or death.
Never use paint on the controller.
If moisture accesses the electrical components of the controller, there is
risk of fire, electric shock, and physical injury or death.
Do not use a damaged device (such as one with a cracked
screen).
There is risk of fire, electric shock, and physical injury or death.
Wear protective gloves when handling equipment.
Sharp edges cause personal injury.
CAUTION