STANDARD | 75
Standard W
all-Mounted
Due to our policy of continuous product innovation, some specifications may change without notification.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
STANDARD WALL-MOUNTED
Electrical Wiring Diagram
SV Frames
Figure 26: ARNU303SVA4 and ARNU363SVA4 Wiring Diagram.
Table 37: SV Frame Wiring Diagram Legend.
*To enable Generation 4 features, outdoor unit DIP switch no. 3 must be set to ON. Please refer to the Multi V 5, Multi V IV, Multi V Water IV, Multi V
S Engineering Manual for additional information.
PCB Connection
Purpose
Function
CN-POWER
AC Power supply
AC Power line input for indoor controller
CN-MOTOR
Fan motor output
Motor output of BLDC
CN-LEV
EEV output
EEV control output
CN-U/D
Step motor
Step motor output
CN-DISP2
Display
Display of indoor status
CN-DISP1
Display
Display of indoor status
CN-CC
Dry contact
Dry contact connection
CN-485
Communication
Connection between indoor and outdoor units
CN-REMO
Remote controller
Remote control connection
CN-EXT1
External ON / OFF controller
External ON / OFF controller connection
CN-TH1
Return air and inlet pipe thermistor
Return air and inlet pipe thermistor connection
CN-TH2
Outlet pipe thermistor
Outlet pipe thermistor connection
CN-TH3
Float switch
Float switch connection