122 | GUIDELINES
MUL
TI V W
all-Mounted Indoor Unit Engineering Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Wired Controller Placement
Gallery and Wall-mounted indoor units can be used with various wired controllers
(optional; sold separately). Wired controllers include a sensor to detect room tem-
perature. To maintain comfort levels in the conditioned space, the wired controller
must be installed in a location away from direct sunlight, high humidity, and where it
could be directly exposed to cold air. Controller must be installed four (4) to five (5)
feet above the floor where its LED display can be read easily, in an area with good
air circulation, and where it can detect an average room temperature.
Do not install the wired controller near or in:
• Drafts or dead spots behind doors and in corners
• Hot or cold air from ducts
• Radiant heat from the sun or appliances
• Concealed pipes and chimneys
• An area where temperatures are uncontrolled, such as an outside wall
Figure 54:
Simplified View of Indoor Unit Terminal Connections—SF Gallery Frames.
4 to 5 feet
above the floor
NO
NO
NO
YES
Remote Controlle r
TEMP
Remote Controlle r
TEMP
Rem o
t e Co
nt rolle
r
TEMP
Wiring Guidelines
APPLICATION GUIDELINES
Figure 57: Proper Location for the Wired Controller.
Indoor Unit Terminal Block
L(L1)
Power Input
208-230V /
60 Hz / 1 Phase
A
A
B
A
B
B
GND 12V
DRY2
DRY1
INTERNET
IDU
SODU
Ground
3(A) 4(B)
N(L2)
Outdoor Unit Terminal Block
To Outdoor Unit
-
-
-
-
Figure 56:
Simplified View of Indoor Unit Terminal Connections—SV Wall-Mounted Frames.
Figure 55:
Simplified View of Indoor Unit Terminal Connections—SJ and SK Wall-Mounted Frames.
Indoor Unit Terminal Block
L(L1)
Power Input
208-230V /
60 Hz / 1 Phase
A
-
-
-
-
-
-
A
B
B
GND 12V
DRY2
DRY1
INTERNET
IDU
SODU
Ground
3 4
N(L2)
Outdoor Unit Terminal Block
To Outdoor Unit
Indoor Unit Terminal Block
1(L)
Power Input
208-230V /
60 Hz / 1 Phase
A
-
-
-
-
-
-
A
B
B
GND 12V
DRY2
DRY1
INTERNET
IDU
SODU
Ground
3(A) 4(B)
2(N)
Outdoor Unit Terminal Block
To Outdoor Unit