background image

Getting Started

2

Getting Start

e

d

1

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

CAUTION: 

TO REDUCE THE RISK OF 

ELECTRIC SHOCK DO NOT REMOVE COVER 
(OR BACK) NO USER-SERVICEABLE PARTS 
INSIDE REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.

This lightning fl ash with 
arrowhead symbol within 
an equilateral triangle is 
intended to alert the user to 
the presence of uninsulated 

dangerous voltage within the product’s 
enclosure that may be of suffi

  cient 

magnitude to constitute a risk of electric 
shock to persons. 

The exclamation point within 
an equilateral triangle is 
intended to alert the user to 
the presence of important 
operating and maintenance 

(servicing) instructions in the literature 
accompanying the product.

WARNING:

 TO PREVENT FIRE OR ELECTRIC 

SHOCK HAZARD, DO NOT EXPOSE THIS 
PRODUCT TO RAIN OR MOISTURE.

WARNING:

 Do not install this equipment 

in a confi ned space such as a book case or 
similar unit.

Always operate the vehicle in 
a safe manner. Do not become 
distracted by the vehicle while 

driving, and always be fully aware of all 
driving condition. Do not change settings, 

or any functions. Pull over in a safe and 
legal manner before attempting such 
operations.

 Do not use for many hours 
at extremely low or high 
temperature. (-10 °C to 60 °C)

To reduce the risk of electric 
shock, do not remove the cover 
or back of this product. There 

are no user-serviceable parts inside. Refer 
servicing to qualifi ed service personnel.

To reduce the risk of fi re or 
electric shock, do not expose this 
product to dripping or splashing 

water, rain, or moisture.

The temperature of unit’s outside 
can be extremely high, please use 
the unit after proper installation 

in your vehicle.

While driving, keep the sound 
volume at a proper level.

Do not drop it and avoid heavy 
impacts at anytime.  

This unit is for vehicles with a 
12-volt battery and negative 
grounding.  Before installing it in 

a recreational vehicle, lorry or bus, check 
the battery voltage. To avoid shorts in the 
electrical system, be sure to disconnect 
the E battery cable before beginning the 
installation.

 This device is equipped with a portable 
battery or accumulator. 

Safe way to remove the battery or the 
battery from the equipment: 

Remove the old battery or battery pack, 
follow the steps in reverse order than the 
assembly. To prevent contamination of 
the environment and bring on possible 
threat to human and animal health, the 
old battery or the battery put it in the 
appropriate container at designated 
collection points. Do not dispose of 
batteries or battery together with other 
waste. It is recommended that you 
use local, free reimbursement systems 
batteries and accumulators.
The battery shall not be exposed to 
excessive heat such as sunshine, fi re or 
the like.

Disposal of waste batteries/
accumulators 

1. When this crossed-out 
wheeled bin symbol is attached 
to batteries/accumulators of Your 

product it means they are covered by 
European Directive 2006/66/EC.

2. This symbol may be combined with 
chemical symbols for mercury(Hg), 
cadmium(Cd) or lead(Pb) if the battery 
Contains more that 0.0005% of 
mercury,0.002% of cadmium or 0.004% of 
lead.

3. All batteries/accumulators should be 
disposed separately from the municipal 
waste stream via designated collection 
facilities appointed by the government or 
the local authorities.

4. The correct disposal of Your old 
batteries/accumulators will help to 
prevent potential negative consequences 
for the environment, animal and human 
health.

5. For more detailed information 
about disposal of Your old batteries/
accumulators, please contact Your city 
offi

  ce, waste disposal service or the shop 

where You purchased the product.

Содержание MAX220UB

















Отзывы: