LG LZ-H050GXH0, Руководство по установке

Страница: 29 / 33

Installation Manual 29
ENGLISH
Field Setting and Test Run
■
Supply/Exhaust ESP setting
1. Function explanation: Set the E.S.P(RPM) value of air conditioner indoor unit.
2. Function control and setting(refer to the explanation at prior page about function entry)
2.1) Select the wind strength with inputting up-down button.
* 01:low, 02:high, 03:very high(Seg flickering)
2.2) Move the setting items with inputting the right-left button.
* wind strength selection
↔
RPM value selection(seg of selected item is flickering)
2.3) Select the RPM value of wind strength with inputting up-down button.
*0~255(Seg selecting)
2.4) Complete the RPM setting with inputting Setting/Cancel button. (Send RPM setting data
of indoor unit)
2.5) Set the Exhaust Air ESP with conducting the 2.1)~2.4) process of installer by inputting func-
tion setting button and changing installer code 04.
■
Production Direction
1. Function Explanation: Set the installation direction of ventilation indoor unit.
2. Function control and setting
2.1) Select the direction value with inputting the up-down button.
*01: normal direction, 02:opposite direction
2.2) Complete the setting with inputting Setting/Cancel button. (stop flickering and send the
data to indoor unit)
■
Override Setting
1. Function explanation: Set the Override condition by setting the Mode Master/Slave of indoor unit.
2. Function control and setting
2.1) Set the Master/Slave value with inputting the up-down button.
*00: Slave, 01: Master
2.2) Complete the setting with inputting Setting/Cancel button.
3. Operation wired remote control after Slave setting
1) When changing operation mode of wired remote control connected to Mode Slave, it only
can change to cycle operation mode.
ex) Outdoor unit cooling : Among wired remote control dehumidification mode, when inputting
Operation Mode Selection button, indicating HL, it goes back to dehumidification mode.
if you input it again, it changes to Artificial intelligence mode
Outdoor
unit
Remote
Controller Remote
Controller Remote
Controller Remote
Controller
Mode Master Mode Slave Mode Slave Mode Slave
<Override connecting Scene>