24
Configuration setup
- It is a mode to set whether to use Select RCU or not . When ‘Select RCU’ is set to ‘Enable’, You can
adjust ‘Number of RCU’ menu .
(1) select rcu
- It is a mode to set Number of RCU .
Number of RCU value range 1~9 (When ‘Select RCU’ is set to ‘Enable’)
Number of RCU value range 0 (When ‘Select RCU’ is set to ‘Disable’)
(2) number of rcu
* RCU(Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV .
- Sets the splash image display time .
- The time can be set to between 0 and 10 seconds .
(3) splash offset time
y
y
Image shown may differ from your TV .
- It is a mode to decide whether to output DC or not for power supply to IB Box in Installation
Menu . We offer a output terminal in one Pin of RS232C Jack for the use of communication .
- 5V DC Power Outlet and 12V DC Power Outlet must operate mutually exclusively . That is, only
one of the two sides must be turned on .
(4) rs232 Dc power outlet
(Except for 22/28LW750H-ZA)
You can select ‘OFF’, ‘5V’ or ‘12V’ by pressing < > button .
• When select ‘5V’ the 5V is forwarded through the port. when select ‘12V’ the 12V is
forwarded through the port .
1
Installation Menu (V2 .23)
LG Hotel Mode Setup
USB Cloning
Password Change
Set ID Setup
Configuration Setup
External Speaker
IR Setup
Network Setup
Pro:Centric
Power Saving
CEC Setup
Clock Setup
PreLoadedApp Setup
Media Share
OK
S/W V 02 .03 .00 .01 / MCU V 02 .05 / FPGA V d . 279
configuration setup
Select RCU
Number of RCU
Splash Offset Time
RS232 DC Power Outlet
One Channel Map
Lock Mode
DTV Channel Update
On Timer Operation
Scart Out
RGB Overlay in RF
Radio Name Display
15Min Auto Off
Auto Sensing
InStant On
Configuration Setup
0
0
Previous
OK
OFF
Yes
No
Auto
One
◄
Disable
►
No
No
◄
Disable
►
◄
Enable
►
Disable
Disable
