LG LTRM1240SB Скачать руководство пользователя

Страница: 9 / 39

-8-

7. OPERATING PROCEDURES

A. OVEN CONTROL PANEL

MICROWAVE CONTROL AREA

1. DISPLAY.

The Display includes a clock and indicators that tell you time of day, cooking time settings, and cooking

functions selected.

2. STOP/CLEAR.

Touch this pad to stop the oven or clear entries.

3. START.

Touch this pad to start all entries (except the Auto Cook and Add Minute function which start automatically)

and to turn Child Lock on or off.

4. AUTO COOK.

Touch this pad to select programming food items.

5. EZ-ON.

Touch this pad to cook at 100% cook power for 1 minute to 99 minutes 59 seconds.

6. AUTO DEFROST.

This pad is an accurate defrosting method for frozen meat, poultry and fish up to 6.0 lbs.

7. Q-DEFROST.

This pad provides you with the quick defrosting method for 1.0 pound frozen foods.

8. CUSTOM SET.

Touch this pad to change the oven's default settings for sound, clock, scroll speed and Lbs/Kg.

9. KITCHEN TIMER.

Touch this pad to use your microwave oven as a kitchen timer.

10. COOK TIME.

Touch this pad to set a cooking time.

11. POWER.

Touch this pad to set a cooking power.

12. NUMBER PADS.

Touch Number Pads to enter cooking time, power level, quantities, or weights.

13. SENSORTOUCH.

This pad allows you to cook most of your favorite foods without having to select cooking times and

power levels.

TOASTER CONTROL AREA

1. Toast.

Toast bread

2. Bagel.

Toasts Bagels

3. Off/Clear.

Touch this pad to stop the toaster or clear entries.

4. On.

Touch this pad to start the toasting process.

5. Darkness Control.

Adjust darkness control to desired setting before cooking foods.

(Default : 5, "1" is the lightest and "9" is the darkest)

6. Indicator Light.

When operating toaster with door closed, this will be illuminated. If you open the door during

toasting, this will blink.

Содержание LTRM1240SB








































Результаты поиска

Содержание LTRM1240SB

Отзывы:

Похожие инструкции для LTRM1240SB

Бренды по названию

Популярные бренды

LG LTRM1240SB, Руководство по обслуживанию

Результаты поиска

Содержание LTRM1240SB

Отзывы:

Похожие инструкции для LTRM1240SB

Бренды по названию

Популярные бренды