LG LTRM1240SB Скачать руководство пользователя страница 10

Страница: 10 / 39

B. EASY USE TABLE

MICROWAVE OVEN

(1) KITCHEN TIMER

1. Touch STOP/CLEAR.
2. Touch KITCHEN TIMER.
3. Touch correct number for time.
4. Touch START.

(2) CHILD LOCK

To set:
1. Touch STOP/CLEAR.
2. Touch “START” more than 4 seconds.
To cancel:
1. Touch STOP/CLEAR.
2. Touch “START” more than 4 seconds.

(3) AUTO COOK

1. Touch STOP/CLEAR.
2. Touch AUTO COOK Category.
3. Touch START.

(Although you don’t touch start, it will start after
4 seconds automatically)

(4) EZ-ON

1. Touch STOP/CLEAR.
2. Touch EZ-ON

(5) AUTO DEFROST

1. Touch STOP/CLEAR.
2. Touch AUTO DEFROST.

Three different defrosting levels are provided.

(Touch 1 : Meat

Touch 2 : Poultry
Touch 3 : Fish)

3. Enter the weight of your food in decimal

increments from 0.1 to 6.0 pounds.

4. Touch START
5. At beeping, turn food over by following the

instructions in the manual.

6. After turning food over, touch START to resume

defrosting.

(6) TIMED COOKING

1. Touch STOP/CLEAR.
2. Touch COOK TIME.
3. Touch number for cooking time.
4. Touch POWER.
5. Touch number for cooking power level.
6. Touch START.

(7) MULTI-STAGE COOKING

1. Touch STOP/CLEAR.
2. Touch COOK TIME.
3. Touch number for cooking time.
4. Touch POWER.
5. Touch number for cooking power level.
6. Repeat steps 2-5 to set 2nd cooking stage.
7. Touch START.

TOASTER

(1) TOAST

1. Touch STOP/CLEAR.
2. Touch TOAST.
3. Touch Darkness Control (1~9 step)
4. Touch START.

(2) BAGEL

1. Touch STOP/CLEAR.
2. Touch BAGEL.
3. Touch Darkness Control (1~9 step)
4. Touch START.

(3) DARKNESS SETTINGS

-9-

Degree of darkness

Select darkness level

Light

1~3

Medium

4~6

Dark

7~9

Содержание LTRM1240SB








































Результаты поиска

Содержание LTRM1240SB

Отзывы:

Бренды по названию

Популярные бренды

LG LTRM1240SB, Руководство по обслуживанию

Результаты поиска

Содержание LTRM1240SB

Отзывы:

Бренды по названию

Популярные бренды